Text or WhatsApp Richard at (808) 600-9260
Lion crestHealthcareInvestmentBanking.com

Debt Capacity Calculator for Healthcare Businesses: Leverage and Coverage Tests

Debt capacity is the lower of two numbers. The first is EBITDA times the lender's maximum leverage multiple. The second is the loan whose year-one interest plus scheduled principal your cash flow covers at the minimum debt service coverage ratio (DSCR). On the default inputs, a business with $4.0 million of EBITDA supports $14.0 million of senior debt, and the leverage test binds. If the business already carries debt that will stay in place, reserve it first. The section on existing debt shows how.

Enter seven inputs in the calculator below. It returns both limits, the binding test, year-one debt service and coverage at capacity. If the calculator does not load in your browser, the five-step formula further down reproduces every output by hand.

Estimate only. Educational, not investment advice.

Market data on this page as of November 20, 2026. All worked examples are hypothetical and the arithmetic is ours. Each figure links to its source.

How to Use the Calculator: Inputs, Outputs and Where Each Number Comes From

Input What to enter Where to find it
EBITDA Trailing twelve months EBITDA the lender will accept, after normalizing owner and physician compensation Quality of earnings (QoE) report, or adjusted TTM financials
Max leverage (x) The lender's ceiling on total senior debt divided by EBITDA Term sheet or lender indication. Default 3.5x
Maintenance capex Annual capital spending needed to keep the business running (equipment, IT, buildouts) Three-year capex history, net of growth projects
Cash taxes Taxes paid in cash after the new interest expense. Include tax distributions to pass-through owners only if the credit agreement deducts them Tax returns or a tax projection that reflects the new debt and entity structure
Interest rate (%) All-in coupon, meaning base rate plus spread. For more than one tranche, the balance-weighted blend Term sheet, or a current quote for floating rate debt
Amortization (% per year) Year-one scheduled principal as a percent of the original loan. For a level-payment loan, the year-one payment constant minus the rate Term sheet amortization schedule or the lender's payment schedule
Min DSCR (x) The lowest coverage ratio the lender allows. Where a loan program sets its own minimum, enter the higher of the two Term sheet covenant section. Default 1.25x
Output Definition
Debt by leverage EBITDA × max leverage
CFADS Cash flow available for debt service: EBITDA − maintenance capex − cash taxes
Debt by coverage (CFADS ÷ min DSCR) ÷ (interest rate + amortization rate)
Debt capacity The lower of debt by leverage and debt by coverage
Binding test Whichever test produced the lower number
Annual debt service Debt capacity × (interest rate + amortization rate)
Coverage at capacity CFADS ÷ annual debt service

The calculator sizes total debt. It does not net out loans that stay in place after closing. Those need the adjustment shown below. It is an estimating tool built on a simplified CFADS and debt service model. Real sizing needs your lender's definitions and a full payment schedule.

Four Assumptions to Check Before You Trust the Output

Calculator assumption What the credit agreement may do instead How to adjust
CFADS = EBITDA − maintenance capex − cash taxes Deduct distributions, unfinanced capex, working capital increases or lease payments. Cap or exclude add-backs Rebuild CFADS line by line from the agreement's definition and enter the result through the capex and tax fields
Year-one debt service = principal × (rate + amortization), interest charged for a full year on the opening balance Schedule the peak payment in a later year (floating rates, step-ups, interest-only periods), or collect monthly or quarterly Enter the peak-year rate and principal percent. See the structure table below
One blended rate and one blended amortization for a multi-tranche stack Give each tranche its own schedule, so the stack's peak year can differ from year one Build the combined year-by-year schedule. See the SBA example
No existing debt stays in place Leave equipment loans, real estate debt or a prior seller note outstanding Reserve existing debt and debt service before sizing new debt

The Debt Capacity Formula in 5 Steps

  1. Multiply EBITDA by the leverage cap. That gives the leverage limit.
  2. Subtract maintenance capex and cash taxes from EBITDA to get CFADS.
  3. Divide CFADS by the minimum DSCR. That is the most debt service the lender will allow each year.
  4. Divide that annual figure by the interest rate plus the amortization rate. That gives the coverage limit.
  5. Take the lower of the two limits.

Step 4 treats year-one debt service as a fixed percent of the original principal. That matches a fixed rate loan with equal principal installments and full-year interest on the opening balance. On that structure year one is the peak year, because interest falls as principal pays down. Other structures need translation. The rule for each: the two inputs should add up to the peak-year scheduled payment divided by the original principal.

Structure How debt service behaves What to enter
Fixed rate, equal principal installments Highest in year one Rate and straight-line amortization as written
Level payment (mortgage-style, including many SBA 7(a) loans) Same total payment every year at a fixed rate Rate, plus amortization equal to annual payment ÷ principal − rate
Floating rate Rises when base rates rise Rate at the lender's forward or stressed assumption
Step-up amortization Rises in later years Principal percent from the peak year
Interest-only period Lowest early, then jumps Inputs from the first full amortizing year

How conservative the full-year interest convention is. Most term loans pay monthly or quarterly, so interest accrues on a balance that falls during the year. Our arithmetic on the $14.0 million loan in the worked example below, at 9% with 5% annual amortization paid in equal installments:

Payment frequency Year-one interest Year-one debt service DSCR on $3,300,000 CFADS
Annual, full year on opening balance (calculator) $1,260,000 $1,960,000 1.68x
Quarterly $1,236,375 $1,936,375 1.70x
Monthly $1,231,125 $1,931,125 1.71x

The calculator overstates year-one debt service by 1.2% to 1.5% on this loan. Treat that as a small built-in cushion, not a reason to borrow more.

Worked Example: $4.0 Million EBITDA at 3.5x Leverage and 1.25x DSCR

Hypothetical: a multi-site specialty practice with an MSO structure, fixed rate, equal principal installments.

Line Value
EBITDA $4,000,000
Max leverage 3.5x
Maintenance capex $300,000
Cash taxes $400,000
Interest rate 9%
Amortization 5% per year
Min DSCR 1.25x
Debt by leverage $4,000,000 × 3.5 = $14,000,000
CFADS $4,000,000 − $300,000 − $400,000 = $3,300,000
Debt by coverage ($3,300,000 ÷ 1.25) ÷ 14% = $2,640,000 ÷ 0.14 = about $18.86 million
Debt capacity $14,000,000
Binding test Leverage
Annual debt service $14,000,000 × 14% = $1,960,000
Coverage at capacity $3,300,000 ÷ $1,960,000 = 1.68x

Leverage binds because the coverage test has about $4.86 million of slack. That slack disappears fast as terms change.

Term change Coverage limit Binding test
Base case: 9% rate, 5% amortization About $18.86 million Leverage
Amortization raised to 10% $2,640,000 ÷ 0.19 = about $13.89 million Coverage
Rate raised to 14%, amortization 5% $2,640,000 ÷ 0.19 = about $13.89 million Coverage

In this formula one point of amortization reduces capacity exactly as much as one point of rate, so five extra points of amortization cut the coverage limit as much as a five point rate increase. Negotiate the amortization schedule as hard as the spread.

Sensitivity Grid: Capacity Across Leverage Caps and DSCR Minimums

Our arithmetic on the same base case: $4.0 million EBITDA, $3.3 million CFADS, 9% rate and 5% amortization, so a 14% year-one constant. The first row is the coverage-based debt limit at each DSCR. Every other cell is debt capacity, the lower of that limit and the leverage limit. L means leverage binds, C means coverage binds.

Leverage cap Min DSCR 1.15x Min DSCR 1.25x Min DSCR 1.35x Min DSCR 1.50x
Coverage-based debt limit $20,496,894.41 $18,857,142.86 $17,460,317.46 $15,714,285.71
2.5x $10,000,000 L $10,000,000 L $10,000,000 L $10,000,000 L
3.0x $12,000,000 L $12,000,000 L $12,000,000 L $12,000,000 L
3.5x $14,000,000 L $14,000,000 L $14,000,000 L $14,000,000 L
4.0x $16,000,000 L $16,000,000 L $16,000,000 L $15,714,285.71 C
4.5x $18,000,000 L $18,000,000 L $17,460,317.46 C $15,714,285.71 C

At a 14% constant and 1.25x, coverage does not bind until leverage passes 4.71x ($18,857,142.86 ÷ $4,000,000). For a business at this margin and on these terms, the leverage cap is the number to negotiate.

Sizing New Debt When the Business Already Has Loans

If any existing debt stays in place after closing, both tests have to reserve room for it. The calculator's coverage output assumes all CFADS is available for the new loan. Adjust by hand:

Test Incremental capacity formula
Leverage (EBITDA × max leverage) − existing debt
Coverage ((CFADS ÷ min DSCR) − existing annual debt service) ÷ (new rate + new amortization)
New-debt capacity The lower of the two

Hypothetical: the same $4.0 million EBITDA practice keeps a $3.0 million equipment loan. The new term loan is priced at 9% with 5% amortization. Our arithmetic for two repayment profiles on that equipment loan:

Line Equipment loan with $600,000 annual debt service Equipment loan with $1,200,000 annual debt service
Leverage room $14,000,000 − $3,000,000 = $11,000,000 $11,000,000
Allowed debt service at 1.25x $2,640,000 $2,640,000
Less existing debt service $2,040,000 left $1,440,000 left
Coverage room at 14% $14,571,428.57 $10,285,714.29
New-debt capacity $11,000,000, leverage binds $10,285,714.29, coverage binds
Combined debt service $1,540,000 + $600,000 = $2,140,000 $1,440,000 + $1,200,000 = $2,640,000
Combined DSCR 1.54x 1.25x

The same $3.0 million balance produces different answers because a short-amortizing equipment loan eats coverage. Running the calculator without this reserve would show $14.0 million of capacity, which overstates new borrowing by $3.0 million in the first case and $3,714,285.71 in the second. If the existing loans are refinanced at closing, include them in the new stack instead and skip the reserve.

Which Test Each Lender Type Runs

Lender type Primary sizing test What drives the number Calculator setup
Bank cash flow term loan Both tests, with quarterly maintenance covenants QoE EBITDA, amortization schedule, covenant definitions Term sheet leverage cap and minimum DSCR or FCCR
SBA 7(a) lender Cash flow coverage on the combined debt, against the higher of the program minimum and the lender's own Level-payment schedule, owner compensation, any seller note payments Set leverage high enough that coverage binds, then use the level-payment amortization input
Private credit or unitranche Leverage on adjusted EBITDA, at a higher coupon Scale, payer mix, sponsor backing Lender's multiple and all-in coupon, then check coverage at that coupon
Asset-based lender Borrowing base on eligible receivables Payer mix, aging, collection history Use the calculator only for coverage. The borrowing base sets the cap
Seller note Negotiated, subordinate to senior debt Price gap between buyer and seller Add a currently paying note to the blend and test coverage on the combined stack

Published leverage figures for healthcare deals, such as the PitchBook data summarized in Sikich's Q3 2026 healthcare M&A update, describe PE-backed healthcare services buyouts. That population is sponsor-backed buyouts, not single practices like the example on this page. Do not apply a sponsor-market leverage figure to a $2 million or $4 million EBITDA borrower. Get a lender indication for your own size and credit, then test it in the grid above.

Floating Rate Example: Why Year Two Can Be the Binding Year

Same $14.0 million loan. Base rates rise 200 basis points after closing, taking the all-in coupon from 9% to 11% in year two. No rate cap or swap is assumed. A hedge limits the increase on the hedged balance.

Line Year 1 Year 2
Opening principal $14,000,000 $13,300,000
Interest 9% × $14,000,000 = $1,260,000 11% × $13,300,000 = $1,463,000
Principal (5% of original) $700,000 $700,000
Debt service $1,960,000 $2,163,000
DSCR on $3,300,000 CFADS 1.68x 1.53x

Year two debt service is $203,000 higher than year one despite the smaller balance. On a floating term sheet, run the calculator at the forward rate the lender's own model uses, not the closing rate.

Multi-Tranche Example: SBA 7(a) Plus a Second Tranche

The SBA caps the size of a 7(a) loan. Confirm the current cap on the SBA's 7(a) program page (accessed November 2026) and with your own attorney and lender. A practice acquisition that needs more debt than the cap allows adds a second tranche from a conventional bank or a private credit fund.

SBA program rules that change the model. SBA program rules affect debt service coverage, the buyer's equity contribution and how a seller note is treated, and those rules can change. Confirm the current terms with your lender and your own attorney, then model from them. Two rules of thumb hold either way:

Seller note status Leverage Year-one debt service
On full standby (no payments) Counts Excluded
Paying currently Counts Included in the blend and the schedule

Hypothetical: a practice with $2,000,000 of EBITDA, $150,000 of maintenance capex and $200,000 of cash taxes. CFADS is $1,650,000. At 3.5x, the leverage limit is $7,000,000. The buyer asks for the full $7.0 million in two tranches. The governing minimum coverage in this example is 1.25x. Tranche sizes and terms are assumptions, not quotes.

The $5.0 million 7(a) tranche is a level-payment loan: 10 years, 10.5% fixed, 120 equal monthly payments. For a variable-rate 7(a) loan, rerun at the lender's stressed rate as in the floating rate example. Our arithmetic on the standard annuity formula:

SBA tranche line Value
Monthly payment $67,467.45
Year-one debt service 12 × $67,467.45 = $809,609.40
Payment constant $809,609.40 ÷ $5,000,000 = 16.19%
Year-one interest (12 monthly charges on the declining balance) $510,895.70
Year-one principal $298,713.70, or 5.97% of the original loan
Amortization input 16.19% − 10.5% = 5.69%

Enter 5.69%, not the 5.97% of principal actually repaid. The calculator charges a full year of interest on the opening balance ($525,000), which is more than the $510,895.70 the loan actually accrues. Entering 5.69% makes rate plus amortization equal the true year-one payment. Treating the loan as 10% straight-line principal would overstate year-one debt service by $215,390.60 ($1,025,000 versus $809,609.40) and understate capacity.

The second tranche repays in equal principal installments over 5 years at 11%, so its year-one constant is 11% + 20% = 31%.

Tranche Balance Rate input Amortization input Year-one debt service
SBA 7(a), 10-year level payment $5,000,000 10.5% 5.69% $809,609.40
Second tranche, 5-year equal principal $2,000,000 11% 20% $620,000
Total $7,000,000 $1,429,609.40
Calculator input Arithmetic Enter
Blended rate ($525,000 + $220,000) ÷ $7,000,000 10.64%
Blended amortization ($284,609.40 + $400,000) ÷ $7,000,000 9.78%
Coverage at $7.0M $1,650,000 ÷ $1,429,609.40 1.15x

The stack fails a 1.25x minimum. The SBA tranche carries 71.4% of the debt but uses 61.3% of the $1,320,000 of allowed debt service ($809,609.40 ÷ $1,320,000). The second tranche carries 28.6% of the debt but, at a 31% constant, needs 47.0% ($620,000 ÷ $1,320,000). Its short schedule pushes the stack over. Size the second tranche to the room left after the SBA loan:

Step Value
Maximum debt service at 1.25x $1,650,000 ÷ 1.25 = $1,320,000
Less SBA tranche debt service $1,320,000 − $809,609.40 = $510,390.60
Second tranche capacity $510,390.60 ÷ 31% = $1,646,421.29
Total debt capacity $6,646,421.29
Leverage at capacity $6,646,421.29 ÷ $2,000,000 = 3.32x

Coverage binds at $6.65 million, $353,578.71 below the leverage limit. Stretch the second tranche to 10 years of equal principal at the same 11% and its constant drops to 21%. The full $7.0 million stack then carries $809,609.40 + $420,000 = $1,229,609.40 of debt service and covers at 1.34x. Leverage binds again. In this example, amortization terms move capacity more than the rate does.

Year-by-Year Schedule for the Coverage-Sized Stack

The blend is valid only when year one is the peak year for the whole stack. Our arithmetic for the $6,646,421.29 stack, with CFADS held flat at $1,650,000. The second tranche repays $329,284.26 of principal a year (the final payment rounds to $329,284.25).

Year SBA debt service Second tranche opening balance Second tranche interest at 11% Second tranche debt service Stack debt service DSCR
1 $809,609.40 $1,646,421.29 $181,106.34 $510,390.60 $1,320,000.00 1.25x
2 $809,609.40 $1,317,137.03 $144,885.07 $474,169.33 $1,283,778.73 1.29x
3 $809,609.40 $987,852.77 $108,663.80 $437,948.06 $1,247,557.46 1.32x
4 $809,609.40 $658,568.51 $72,442.54 $401,726.80 $1,211,336.20 1.36x
5 $809,609.40 $329,284.25 $36,221.27 $365,505.52 $1,175,114.92 1.40x
6 to 10 $809,609.40 Repaid $809,609.40 2.04x

Year one is the peak. Change one term and the blend breaks. Give the $2.0 million second tranche one interest-only year, then equal principal over four years:

Year SBA tranche Second tranche Stack debt service DSCR on $1,650,000
1 $809,609.40 $220,000 interest only $1,029,609.40 1.60x
2 $809,609.40 $220,000 + $500,000 = $720,000 $1,529,609.40 1.08x

A year-one blend shows 1.60x and passes. Year two fails. Size this stack on year two.

Build your own schedule in a spreadsheet:

  1. One column block per tranche: opening balance, rate, interest, scheduled principal, debt service.
  2. Use the lender's payment frequency for interest. Monthly or quarterly accrual lowers interest slightly against the calculator.
  3. Add rows for a currently paying seller note, earnout payments and any existing debt that stays in place.
  4. Sum debt service by year and divide CFADS by it. Run CFADS flat, then at your stress case.
  5. Mark the lowest DSCR year. Enter that year's rate and principal percent in the calculator.

Rent, Leases and Fixed Charge Coverage

Lease treatment Where the cost sits What to do in the calculator
Operating lease (ASC 842) Single lease cost inside operating expenses, so EBITDA is already after rent No adjustment for a DSCR test
Finance lease (ASC 842) Split into interest and amortization, both below EBITDA Add the annual lease payments to debt service, or reserve them as existing debt service
Fixed charge coverage covenant Depends on the agreement's definition Rebuild the ratio from the definition, as below

There is no single FCCR formula. Some credit agreements use no rent add-back and deduct distributions and unfinanced capex instead. Others add rent back to EBITDA and count rent as a fixed charge. Both versions on the $4.0 million EBITDA practice and $14.0 million loan, with hypothetical $200,000 of owner distributions and $1,000,000 of annual facility rent:

Line DSCR (calculator) FCCR, no rent add-back FCCR, rent-adjusted (EBITDAR)
Starting earnings EBITDA $4,000,000 EBITDA $4,000,000 EBITDAR $5,000,000
Less capex and cash taxes $700,000 $700,000 $700,000
Less distributions Not deducted $200,000 Not deducted
Numerator $3,300,000 $3,100,000 $4,300,000
Fixed charges $1,960,000 $1,960,000 $1,960,000 + $1,000,000 rent = $2,960,000
Ratio 1.68x 1.58x 1.45x

The rent-adjusted version hits ASCs, imaging centers and dental groups with heavy facility leases hardest. The no-add-back version hits pass-through owners who take large distributions. Size against whichever version your credit agreement tests.

Seller Note Example: Coverage on the Combined Stack

Hypothetical: the buyer of the $4.0 million EBITDA practice adds a $2.0 million seller note at 6%, paid currently in equal principal installments over five years. This is a conventional bank deal, so the note is not on standby.

Line Value
Senior debt service $1,960,000
Seller note interest, year 1 $2,000,000 × 6% = $120,000
Seller note principal, year 1 $2,000,000 ÷ 5 = $400,000
Combined debt service $2,480,000
Combined DSCR $3,300,000 ÷ $2,480,000 = 1.33x
Total leverage $16,000,000 ÷ $4,000,000 = 4.0x

Senior coverage alone is 1.68x. With the note, it is 1.33x, 0.08x above a 1.25x floor. If the covenant tests total leverage rather than senior leverage, the note puts the borrower at 4.0x against a 3.5x limit on day one. A seller who accepts this note sits behind a senior lender whose own covenant has no room. The healthcare capital stack shows where each layer ranks, and healthcare deal structures covers how seller notes sit next to rollover equity and earnouts.

Stress Test and Choosing Closing Debt

Same $14.0 million loan, covenants at a maximum 3.50x leverage and a minimum 1.25x DSCR. Both tables below test leverage against the closing balance of $14.0 million. Scheduled amortization lowers the tested debt each quarter, so the cushion figures are somewhat conservative. Our arithmetic holds cash taxes at 10% of EBITDA, the base-case ratio. Actual cash taxes will not track EBITDA exactly, because interest deductibility and entity structure change the bill. Maintenance capex stays at $300,000 and debt service at $1,960,000.

EBITDA decline EBITDA CFADS Leverage DSCR Covenant status
0% $4,000,000 $3,300,000 3.50x 1.68x Compliant, zero leverage headroom
10% $3,600,000 $2,940,000 3.89x 1.50x Leverage breached, DSCR passes
15% $3,400,000 $2,760,000 4.12x 1.41x Leverage breached, DSCR passes
23.6% $3,055,555.56 $2,450,000 4.58x 1.25x Leverage breached, DSCR at the floor

At closing, leverage sits exactly at the 3.50x maximum and complies. Any decline in EBITDA puts it in breach. DSCR holds until EBITDA falls 23.6%. Headroom comes from borrowing less or from a looser covenant. Borrowing less raises the equity check. Our arithmetic, using the $41.5 million of total uses in the final section:

Closing debt Closing leverage Year-one debt service Closing DSCR EBITDA cushion before 3.50x trips Equity and subordinated capital needed
$14,000,000 3.50x $1,960,000 1.68x 0% $27,500,000
$13,000,000 3.25x $1,820,000 1.81x 7.1% $28,500,000
$12,000,000 3.00x $1,680,000 1.96x 14.3% $29,500,000

Each quarter turn of headroom costs $1.0 million of extra equity and frees $140,000 of annual debt service, so a half turn costs $2.0 million and frees $280,000.

If your history shows Start from Why
Quarterly EBITDA within a few percent, long-tenured providers, payer contracts renewed $13,000,000 Enough cushion to absorb one soft quarter without a cure
A past year with a 10% EBITDA swing, or a top payer contract renewing within 18 months $12,000,000 The 14.3% cushion covers a repeat of that year
One provider producing a large share of collections $12,000,000 or below, or a covenant set above 3.50x A single departure can move EBITDA more than any half turn covers
Equity already committed and cheap relative to the lender's spread $12,000,000 The extra equity costs less than the risk of a breach

The $14,000,000 row only makes sense when the lender sets the covenant above closing leverage. Covenant definitions matter as much as the levels. Equity cure rights, add-back caps and whether leverage is tested on trailing or annualized EBITDA all change how fast a bad quarter becomes a breach.

Debt as a Share of Enterprise Value

Capacity means more next to value. The $4.0 million EBITDA practice priced four ways (our arithmetic on the published multiples):

Valuation basis and population Multiple Enterprise value $14.0M debt as % of EV
BuckheadFMV median EV/EBITDA, US healthcare services control deals announced Jan 2023 to Oct 2026, 68 deals with positive EBITDA 9.6x $38,400,000 36.5%
Same study, excluding bankruptcy and other distressed sales 10.1x $40,400,000 34.7%
Physician practices at $3M to $5M EBITDA, indicative range in Sikich's Q3 2026 update, low end 9x $36,000,000 38.9%
Same Sikich range, high end 11x $44,000,000 31.8%

The populations differ. BuckheadFMV screened 187 control transactions but reports EV/EBITDA only where EBITDA was positive and disclosed, and notes that its EBITDA medians lean toward larger transactions. Sikich gives an indicative range for one EBITDA band, not a transaction median. Read the rows as separate reference points.

Size changes the picture. Sikich's indicative physician practice ranges rise from 5x to 7x EBITDA below $1 million of EBITDA, to 7x to 9x at $1 million to $3 million, 9x to 11x at $3 million to $5 million and 11x to 13x above $5 million. Our arithmetic on what a 3.5x loan represents in each band:

Practice EBITDA band (Sikich, Q3 2026) Indicative EV/EBITDA 3.5x debt as % of EV
Below $1M 5x to 7x 70.0% to 50.0%
$1M to $3M 7x to 9x 50.0% to 38.9%
$3M to $5M 9x to 11x 38.9% to 31.8%
Above $5M 11x to 13x 31.8% to 26.9%

The same leverage multiple leaves far less equity under the loan at small practice size. Lenders weigh that cushion, so expect a leverage cap that works for a $4 million EBITDA practice to be negotiated down for a $750,000 EBITDA practice.

Many sellers never test their own debt capacity. The Private Equity Stakeholder Project's 2025 review, built on PitchBook and LevinPro HC data that PESP calls likely an undercount, tracked 1,029 PE-backed healthcare deals in 2025: 151 leveraged buyouts, 664 add-on acquisitions and 214 growth investments. In dental care, 95% of 149 deals were add-ons by PE-owned platforms. In outpatient care, Becker's ASC Review reports that 119 of PESP's 148 deals in 2025 were add-ons, or 80.4% (our arithmetic). Add-ons are funded under the platform's credit facility, so the seller's practice is sized into the platform's leverage test, not its own.

3 Ways the Number Goes Wrong in Healthcare Deals

1. The lender's EBITDA is lower than yours. Credit committees size on QoE-adjusted EBITDA. They cut pro forma add-backs, unsigned payer rate increases and synergy credits, and they normalize physician compensation to market. A $500,000 cut to EBITDA removes $1.75 million of capacity at 3.5x. Work through the quality of earnings prep checklist before you request term sheets.

2. The coverage definition is stricter than the calculator's. Distribution deductions, rent-adjusted fixed charges, finance leases, retained loans, floating rates and short-amortizing tranches each lower the ratio, as the examples above show. Read the definitions section of the credit agreement before you trust any single number.

3. CFADS shrinks after closing. Sector growth does not protect a single borrower. The CMS National Health Expenditure fact sheet shows national spending on physician and clinical services still growing in 2024 and projects continued growth through 2034. A practice's coverage still turns on its own payer contracts, a departing high producer or a wage reset. For the labor line in a stress case, check current employment and wage data on the BLS Health Care and Social Assistance industry page.

Bank Term Loan vs. Seller Note: What to Check in Each Document

Passing both tests at closing does not end the credit analysis. The paper you sign decides how many ways a bad quarter becomes a default.

Trigger Bank term loan: what to confirm Seller note: what to confirm
Missed payment Grace period length and whether it differs for interest and principal Whether the subordination agreement blocks payment or enforcement while senior debt is outstanding
Financial maintenance covenants Which ratios, test frequency, and the exact EBITDA and fixed charge definitions Whether any covenants exist and whether they track the senior levels
Reporting covenants Monthly or quarterly financials, audit or review requirement, compliance certificates What financial reporting the holder receives
Change of control Default or mandatory prepayment on a sale Whether the note accelerates on resale
Licensure and reimbursement representations Scope and what counts as a breach Whether any are included
Cross-default Threshold for other debt that triggers default Whether a senior default triggers the note, and the standstill period
Remedy Acceleration and collateral rights How long the holder must wait before enforcing

For a buyer, the table shows how much default risk sits with the bank versus the seller. For a seller, the subordination terms show when the note can be collected.

What to Do When Coverage Fails After Closing

A breach does not have to end in enforcement. A plan that puts fresh equity in front of the credit committee can open room to negotiate a waiver, an amendment or a covenant reset. Some credit agreements also include an equity cure right that lets owners inject cash to fix a missed test, usually with limits on how often. Check whether yours does and on what terms.

That plan works best when the equity is committed before the call with the lender. Family offices and physician investors are the usual sources. See capital raising for healthcare companies, raising capital from physician investors and management services organizations. If an intermediary offers to place the equity, look up its registration on FINRA BrokerCheck.

Next Step: Size the Equity Gap on a $40.0 Million Purchase

Hypothetical uses for the same practice at 10x EBITDA, close to the 10.1x BuckheadFMV non-distressed median above:

Line Value
Purchase price $40,000,000
Fees and expenses $1,000,000
Working capital $500,000
Total uses $41,500,000
Senior debt at capacity $14,000,000
Equity and subordinated capital needed $27,500,000
  1. Run the calculator on QoE EBITDA, the credit agreement's CFADS definition and the term sheet inputs, translated with the structure table.
  2. Reserve any debt that stays in place.
  3. Build the year-by-year schedule for the combined stack and size on the peak year.
  4. Pick closing debt from the headroom table, then subtract it from total uses.
  5. Run the capital raise sizing calculator on the remainder, and compare bank, SBA, private credit and asset-based options in the healthcare debt financing guide. The recapitalization guide covers dividend and majority recap structures.

Pre-Term-Sheet Checklist

Questions Owners Ask About Healthcare Debt Capacity

What is debt capacity for a healthcare business?

Debt capacity is the most senior debt a lender will extend against the business's cash flow. Lenders run two tests. Leverage caps total debt at a multiple of EBITDA. Coverage caps debt at the level where cash flow available for debt service still exceeds scheduled interest plus principal by the required ratio. The lower of the two numbers is your capacity. The test that produces it is the binding constraint.

What is a DSCR and what minimum do lenders use?

The debt service coverage ratio divides cash flow available for debt service by scheduled interest and principal for the same period. A 1.25x minimum means the business must generate $1.25 of cash flow for every $1.00 of debt service. Each lender sets its own minimum by credit, sector and loan type. SBA 7(a) loans also carry a program minimum set in the SBA's lending rules, and a lender can require more. The calculator's 1.25x default is an illustrative input. Enter the higher of your lender's minimum and any program minimum, and use the sensitivity grid on this page to see how capacity moves between 1.15x and 1.50x.

How do I size new debt if the business already has loans?

Reserve the existing loans first. Subtract existing debt from the leverage limit. Subtract existing annual debt service from the maximum debt service, which is CFADS divided by the minimum DSCR, before you divide by the new loan's rate plus amortization. On this page's example, $1.2 million of existing annual debt service cuts new-debt capacity from $11.0 million on leverage to $10.3 million on coverage, and coverage becomes the binding test.

Should I borrow the full amount the calculator shows?

Not if the covenant is set at the same level. The calculator shows the maximum at closing, and covenants are then tested every quarter against the same ratios. A loan sized exactly at a 3.5x leverage covenant has zero headroom. Closing at 3.0x, half a turn below, lets EBITDA fall 14.3% before that covenant trips. Either borrow below the maximum or negotiate covenant levels above closing leverage. The right gap depends on how much your EBITDA moves quarter to quarter.

Does the calculator work for seller notes, SBA loans and private credit?

Yes, with the right inputs. For private credit, enter the lender's multiple and coupon. For a level-payment loan such as an SBA 7(a) loan, set the amortization input so that rate plus amortization equals the year-one payment divided by the original principal. For a stack with more than one tranche, enter balance-weighted blends of both inputs, then build the year-by-year schedule shown on this page to confirm year one is the peak year. A seller note that pays currently draws on the same cash flow, so include it in the blend. A seller note on standby adds to leverage but not to early-year debt service.

Why does my lender test fixed charge coverage instead of DSCR?

Fixed charge coverage widens what counts as a fixed charge or narrows the cash flow above the line. Some credit agreements define it as EBITDA less unfinanced capex, cash taxes and distributions, divided by interest plus scheduled principal, with no rent add-back. Others add rent back to EBITDA and count it as a fixed charge. On the worked example on this page, the first version with $200,000 of distributions gives 1.58x and the rent-adjusted version with $1.0 million of rent gives 1.45x, against 1.68x on DSCR. The credit agreement's definition decides which applies.

Sources